LED Bulb
5050 series---60 SMD
MOQ ： piece
Lead Time ： Days
Seller Support : Trade Authenticity Guaranteed & Accepting
Payment : L/C，T/T，Western Union, Money Gram, Credit Card, Paypal
Product details
Supply Ability
- Supply Ability： piecesWarranty(Year)：1 Year
Packaging & Delivery
- Packaging： piece
Product Specifications
Product Description
Description:
5050 SMD strip, 60pcs/meter
Long lifespan up to 20,000 hours
Flexible&slim and can be cut apart every 3-LEDs
Easy Installation onto flat surface with "3M" tape
Higher brightness at lower cost with super bright LEDs
CE certificate & RoHS compliance
Application:
Car Decoration
Architectural decorative lighting
Stairway
Accent lighting
Archway,canopy and bridge edge decoration.
Assembly Information
- Solder connection should only be performed on designated solder pads (marked “ +/-”). During? soldering, don’t exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 Celsius degrees.
- The smallest unit (50mm or 100mm - 3 LEDs) can be removed by cutting with scissors between the designated solder pads.
- The mounting of the strip is facilitated by means of the double-sided adhesive on the back-surface of the strip. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partide. The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the strip is appropriately positioned. Press on the strip with about 20N/cm2 (refer to application techniques of 3M adhesive transfer tapes).
- The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.
You May Like
- Free Member
- Trade Assurance
Company Location:
Year Established: 18YRS
